Series: C22Version: V1.0Manufacturer: TILLUME
1. 24V 5A DT8 DALI LED Controller #
2-channel constant voltage DALI LED controller, rated 24V input voltage, supports 12V-30V input.
DALI DT8-TC Color Temperature Light Control Mode.
Supports 1 DALI address, 1 address controls 2 LED channels.
Compliant with DALI standard protocols IEC62386-102, IEC62386-207, IEC62386-209, compatible with other brands of DALI products, such as Luantone.
PWM digital dimming, factory default standard DALI logarithmic dimming curve, while supporting user-defined linear dimming.
3.9KHz PWM dimming frequency, flicker free exemption dimming frequency, eye friendly.
Support color temperature customization, factory default physical minimum color temperature value of 2200K, maximum color temperature value of 6500K. Support KNX to DALI gateway control, KNX ETS software configuration friendly.
Equipped with open circuit error reporting, anti reverse connection, automatic recovery function for short circuit and overcurrent protection. Fault removal and automatic recovery
2. Core Parameter #
Input Voltage 12-30V DC Note1 Rated Voltage 24V DC Output Voltage 12-30V DC & Rated Voltage 24V DC Max. Output Current 5A Each channel Note2 Max. Output Power 120W Input & OutputType Constant voltage input/output Overcurrent protection When the current reaches 5A, the system automatically shuts down and restarts after 6 seconds
Note 1: It is not recommended to operate the equipment for a long time at 30V input. It is recommended to use a working voltage of 24V
Note 2: The rated value is 5A, with an actual tolerance range of 5%
Communication protocol DALI DALI address 1 address controls 2 LED channels. PWM dimming frequency 3.9KHz Dimming range 1-100% factory default physical min & max CCT Note3 2200K / 6500K
Note 3: Support users to redefine CCT using DALI Master
Dimension and usage environment #
Dimension L121mm X W45mm X H25mm Ambient Temperature -20℃ ~ 45 ℃ IP GRADE IP20 Warranty 5 years
3. Installation and wiring #
4. Supports DALI Commands List #
Supported IEC62386-102/207/209 protocol instructions #