81061M12 | 6W+6W 2200-6500K 24V LED Spot Spec

Series： Expert
Version： V1.0
Manufacturer： TILLUME

1. 6W+6W 24V Tunable White Spot #

2. Core Parameters #

Optical Performance #

Parameter	Rated Value
Luminous Flux note1	360LM~540LM
Luminous Efficiency	60LM/W-90LM/W
Color Temperature Range note2	2200K-6500K
Color Rendering Index note3	>95
1. 2200K Channel	>90
2. 6500K Channel	>90
Color Fidelity Index	>92
Color Saturation Index	>100
Standard Deviation of Color Matching（SDCM）	<3
Beam Angle	60 Degree

• Note ¹: The Luminous Flux consistency deviation range is approximately ±10%.
• Note ²: CCT tolerance: 2200K is ±50K, 6500K is ±150K.
• Note ³: The Vaule is General color rendering index (Ra)
• Note ⁴: All tests were conducted under controlled ambient temperature conditions (25°C) with measurements recorded after 1 hour of continuous operation.

Electrical Characteristics #

• Note⁵: the wattage consistency deviation range is approximately ±5%
• Note⁶: Test after LED worked 1 hours

Dimmable and Tunable White #

Parameter	Data
Dimming Methods	24V PWM
Support PWM Frequency	100Hz to 20KHz Note7
CCT Adjust Range	2200K to 6500K
Dimming Range	0.1%~100% Note8
Compatibility & Noise	Matching the mainstream controller in the market Note9

• Note⁷ : The Spot circuit response time is minimum 100nS, Considering that high-frequency PWM will cause EMC problems and require higher controller performance, we recommend a dimming frequency of no more than 8KHz.
• Note⁸: The dimming depth generally depends on the performance of the LED controller. As long as the time of one cycle is greater than 500nS, the spot will work normally.
• Note⁹: We know that customers use the with MDT, LUANTONE, LOXONE controllers and work well.

3.Mechanical Structure #

Physical Parameters #

4. Environmental Adaptability #

Parameter	Data
Work Temperature	-25℃ ~ +60℃
Storage Temperature	-25℃ ~ +80℃
Humidity	45%-75% RH
Lifespan	>50,000hrs @Ta=25℃

5. Wires Connection Identification #

6. Conformity List #

EMC Directive Related Standards​	Requirement
EN 55015	Limitation of radiated and conducted emission for electrical lighting equipment.
EN 61547	Immunity requirements of equipment for general lighting purposes.
​EN 61000-3-2	Limitation of harmonic current emissions (equipment input current ≤ 16 A per phase).
​EN 61000-3-3	Limitation of voltage changes, voltage fluctuations, and flicker in public low-voltage supply systems.

Safety Standards for Lighting Equipment	Requirement
​EN 60598-1	Safety of luminaires – Part 1: General requirements and tests.
EN 61347-1	Safety of lamps and lamp controlgear – Part 1: General requirements and tests.
​​EN 61347-2-13	Particular requirements for electronic control gear for LED modules.
EN 62031	Safety specifications for LED modules for general lighting.

Photobiological and Electromagnetic Safety Standards	Requirement
​EN 62471	Photobiological safety of lamps and lamp systems.
EN 62493	Assessment of human exposure to electromagnetic fields from information technology equipment.