Series： C22Version： V1.0Manufacturer： TILLUME
1. 24V 5A DT6 DALI LED Controller #
1-channel constant voltage DALI LED controller, rated 24V input voltage, supports 12V-30V input.
DALI DT6 Dimming Light Control Mode.
Supports 1 DALI address.
Compliant with DALI standard protocols IEC62386-101, IEC62386-202, IEC62386-207, compatible with other brands of DALI products, such as Luantone.
PWM digital dimming, factory default standard DALI logarithmic dimming curve, while supporting user-defined linear dimming.
3.9KHz PWM dimming frequency, flicker free exemption dimming frequency, eye friendly.
Support KNX to DALI gateway control, KNX ETS software configuration friendly.
Supports 256-level dimming accuracy.
Equipped with open circuit error reporting, anti reverse connection, automatic recovery function for short circuit and overcurrent protection. Fault removal and automatic recovery
2. Core Parameter #
Input Voltage 12-30V DC Note1 Rated Voltage 24V DC Output Voltage 12-30V DC & Rated Voltage 24V DC Max. Output Current 5A Note2 Max. Output Power 120W Input & OutputType Constant voltage input/output Overcurrent protection When the current reaches 5A, the system automatically shuts down and restarts after 6 seconds
Note 1: It is not recommended to operate the equipment for a long time at 30V input. It is recommended to use a working voltage of 24V
Note 2: The rated value is 5A, with an actual tolerance range of 5%
Communication protocol DALI DALI address 1 address PWM dimming frequency 3.9KHz Dimming range 1-100%
Dimension and usage environment #
Dimension L121mm X W45mm X H25mm Ambient Temperature -20℃ ~ 45 ℃ IP GRADE IP20 Warranty 5 years
3. Installation and wiring #
4. Supports DALI Commands List #
Supported IEC62386-101/102/207 protocol instructions #
